SPARTUS®
ProTIG 321PW DC
INDUSTRIAL TIG PULS
Technical parameters
Input | ~3× 400V ± 10% 50 / 60 Hz |
TIG welding current [A] | 10 320 |
Duty cycle [%] | 60 |
TIG PARAMETERS | |
Initial current, final current | ![]() |
Pre-gaz [s] | 0,1 2 |
Time of current rise [s] | 0 10 |
Time of current dropping [s] | 0 10 |
Post-gaz [s] | 0 10 |
Pulsation | ![]() |
Pulse current [A] | 10 320 |
Current [A] | 10 320 |
Pulse width [%] | 5 95 |
Pulse frequency [Hz] | 0,5 200 |
Switch 2T/4T | ![]() |
Arc ignition | LIFT / HF |
Remote control output | ![]() |
MMA PARAMETERS | |
Welding with MMA coated electrode | ![]() |
MMA welding current [A] | 10 320 |
Adjustment range Hot Start [%] | 0 10 |
Adjustment range Arc Force [%] | 0 10 |
Idle voltageo [V] | 72,6 |
OTHER | |
Current consumption [A] | TIG 18 / MMA 23,8 |
Power factor (cosφ) | 0,7 |
Efficiency η [%] | 85 |
Insulation class | H |
Protection class | IP21S |
Water cooler | ![]() |
Tank capacity [l] | 5 |
Weight [kg] | 74,5 |
Dimensions [mm] | 1150 × 600 × 1200 |
Description:
SPARTUS® ProTIG 321PW DC it is a modern inverter welder adopts the latest pulse width modulation PWM technology and
transistor IGBT power module.
It allows TIG DC and MMA DC welding with current up to 320A.
It is powered from a 400V three-phase network.
The high-class source allows you to set the following parameters in the TIG method:
• Up Slope / Down Slope time,
• for TIG Puls: Puls Current, Base Current, Pulse Frequency, Pulse Width,
• mode selection 2T/4T / SPOT,
• Pre Gas, Post Gas,
in the MMA method:
• welding current,
• Arc Force,
• Hot Start.
All settings SPARTUS® ProTIG 321PW DC are regulated by a modern LCD display. This not only
facilitates control, but also allows for the precise setting and control of advanced functions due
to the fact that the parameters can be continuously and steplessly adjusted.
Thanks to the TIG Puls function, the device is perfect for welding very thin sheets.
ProTIG 321PW DC has 10 memory channels. The user can easily save and recall the most used
settings.
The ProTIG 321PW DC model is additionally equipped with an integrated liquid cooler, which
ensures efficient cooling of the gun during welding with high currents. The whole is placed on
a transport cart with space for a shielding gas cylinder.
Modern design, LCD function panel and the possibility of wireless control in combination with
high-class components makes the ProTIG 321PW DC stand out on the market.
The professional device of the SPARTUS® Pro line is perfect suited to the production sector and
industry.
SPARTUS® ProTIG 321PW DC package:
Device SPARTUS®ProTIG 321PW DC
Cooler
Coolant 5l
4 wheel drive set
TIG torch SPARTUS® SPP18 4B X 4m
TIG toolbox (consumable kit)
3m electrode holder
3m work clamp
Gas hose
User's manual

Torch SPP18 current-carrying capacity 350A DC
