SPARTUS®
EasyTIG 203P DC
EASY TO USE TIG DC WITH PULSE
Technical parameters
| Input | ~1× 230V ± 10% 50 / 60 Hz |
| Welding Current TIG [A] | 10 – 200 |
| Duty cycle [%] | 60 |
| TIG PARAMETERS | |
| Start Amps, End Amps |  |
| Gas pre flow [s] | 0 – 2 |
| Up slope [s] | 0 – 10 |
| Down slope [s] | 0 – 10 |
| Gas post flow [s] | 0 – 10 |
| TIG PULSE mode | |
| Pulse Amps [A] | 5 – 200 |
| Base Amps [A] | 5 – 200 |
| Pulse Width [%] | 5 – 95 |
| Pulse frequency [Hz] | 0,5 – 200 |
| 2T/4T Control | |
| Arc ignition | LIFT / HF |
| MMA PARAMETERS | |
| MMA welding mode | |
| Welding current MMA [A] | 10 – 200 |
| Duty cycle [%] | 40 |
| Hot Start range [%] | 0 – 10 |
| Arc Force range [%] | 0 – 10 |
| No-load voltage [V] | 69 |
| OTHER | |
| Current consumpiton [A] | TIG 32 / MMA 47 |
| Power factor (cosφ) | 0,6 |
| Efficiency η [%] | 85 |
| Insulation class | H |
| Protection class | IP21S |
| Weight [kg] | 7,9 |
| Dimensions [mm] | 420 × 135 × 240 |
Description:
SPARTUS® Easy TIG 203P DC is lightweightand easytouse TIG DC withpulse. Allows welding TIG AC/DC and modes in 10 – 200A range. It is powered with single-phase 230V source power.
The device is equipped with a clear function panel, the operation of which has been reduced to a minimum - a multifunctional knob and two buttons.
Despite its simple structureEasyTIG 203P DC is equipped in advanced functions supporting the welding process in TIG method. A diagram of TIG parameterson the panel allows for full adjustment:
- gas flow time before and after welding
- up slope and down slope time.
In addition,the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment:base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joiningeven very thin sheets.
Depending on the welder’spreferencesEasyTIG 203P DC can work in 2T or 4T mode.
MMA welding mode(to 200A)is assisted by functions: Arc Force and Hot Start.
Thanks to its lightness and handy constructionEasyTIG 203P DC is perfect for outdoor works.
Examples of use: portable repair, workshop, maintenance, constructions.
EasyTIG 203P DC package 17 4m:
Device SPARTUS® EasyTIG 203P DC
TIG torch SPE 17 1B 4m
Set of consumables
3m work clamp
Gas hose
User's manual
Package price [EUR]:
