SPARTUS®
ProTIG 225P
AC/DC
MODERN, PORTABLE TIG AC / DC PULSE
The device has ability to work with remote control devices such as:
wireless pilot, foot pedal.
Technical parameters
| Input | ~1× 230V ± 10% 50 / 60 Hz |
| Welding Current TIG [A] | 10 – 200 |
| Duty cycle [%] | 60 |
| TIG PARAMETERS | |
| Start Amps, End Amps |  |
| Gas pre flow [s] | 0,1 – 2 |
| Up slope [s] | 0 – 10 |
| Down slope [s] | 0 – 10 |
| Gas post flow [s] | 0 – 10 |
| TIG PULSE mode | |
| Pulse Amps [A] | 10 – 200 |
| Base Amps [A] | 10 – 200 |
| Pulse Width [%] | 5 – 95 |
| Pulse frequency [Hz] | 0,5 – 999 |
| AC frequency [Hz] | 50 – 250 |
| AC Wave Forms | Square, Sinusoidal, Triangular |
| AC balance [%] | 10 – 99 |
| 2T/4T Control | |
| Arc ignition | LIFT / HF |
| Output remote control | |
| MMA PARAMETERS | |
| MMA welding mode [AC/DC] | |
| Welding current MMA [A] | 10 – 200 |
| Hot Start range [A] | 0 – 10 |
| Arc Force range [A] | 0 – 10 |
| No-load voltage [V] | 66 |
| OTHER | |
| Current consumpiton [A] | AC: TIG 20.4 / MMA 29.1 DC: TIG 21.5 / MMA 30.8 |
| Power factor (cosφ) | 0,99 |
| Efficiency η [%] | 80 |
| Insulation class | H |
| Protection class | IP21s |
| Weight [kg] | 16 |
| Dimensions [mm] | 605 × 215 × 410 |
Description:
SPARTUS® ProTIG 225P AC/DC is a inverter welder in a modern edition. It allows TIG AC / DC and
MMA AC / DC welding with current up to 200A. The device is powered from a 230V one-phase network.
Thanks to the solutions used, the ProTIG 225P AC/DC also enables advanced TIG AC and TIG DC welding with a
choice of arc ignition HF or Lift method. The device is equipped with a pulse welding function, which makes the
machine perfect for welding very thin sheets and aluminum.
ProTIG 225P AC/DC has functions supporting the welding process in TIG method:
– output AC waveforms: square, sinusoidal, triangular,
– 2T/4T Trigger Control,
– AC balance, AC frequency, pulse frequency, pulse width and pulse amps adjustment,
– up slope and down slope adjustment,
– SPOT welding.
ProTIG 225P AC/DC enables MMA AC and MMA DC welding. The process of joining metals in this method is
additionally supported by functions such as:
– Arc Force
– Hot Start.
Additionally the device has 10 memory channels. The user can easily save and recall the most used
settings.
Modern design, light weight and LCD function in combination with high-class components makes the ProTIG 225P
AC/DC stand out on the market.
The professional device of the SPARTUS® Pro line is perfect suited to the production sector and
industry.
SPARTUS® ProTIG 225P AC/DC package:
Device SPARTUS®ProTIG 225P AC/DC
TIG torch SPARTUS® TIG mini SPP 17 4B X 4m
TIG toolbox (consumable kit)
3m electrode holder
3m mass hose
Gas hose
User's manual
Torch mini SPP 17 current-carrying capacity 150A DC
