SPARTUS®
ProMIG 505
SYNERGIC MIG DESIGNED FOR INDUSTRY
Technical parameters
| Input | ~3× 400V ± 10% 50 / 60 Hz |
| Welding current MIG [A] | 30 – 500 |
| Duty cycle MIG [%] | 60 |
| MIG PARAMETERS | |
| Wire feeder | separate, 4 - roll |
| Welding wire spool | ≤ 15 / ∅200/300 |
| Wire diameter Ø [mm] | 0.6 / 0.8 / 1.0 / 1.2 / 1.6 |
| Wire feeding speed [m/min] | 2.5 – 24 |
| Wire feeding test |  |
| 2T / 4T control | |
| Spool Gun | |
| Synergic | |
| TIG PARAMETERS | |
| TIG welding mode | TIG DC |
| TIG welding current [A] | 10 – 500 |
| Duty cycle [%] | 60 |
| Gas pre flow [s] | 0 – 10 |
| Up slope [s] | 0 – 10 |
| Down slope [s] | 0 – 10 |
| Gas post flow [s] | 0 – 10 |
| 2T/4T control | |
| Arc ignition | LIFT |
| MMA PARAMETERS | |
| MMA welding mode | |
| MMA welding current [A] | 10 – 500 |
| Hot Start | 0 – 10 |
| Arc Force | 0 – 10 |
| Duty cycle [%] | 60 |
| OTHER | |
| Max. current consumpiton [A] | MIG 40.5 / TIG DC 32.4 / MMA 41.1 |
| Efficiency η [%] | 90 |
| Power factor (cosφ) | 0,77 |
| Insulation class | F |
| Protection class | IP21S |
| Water cooler | |
| Tank capacity [l] | 5 |
| Weight [kg] | 101.5 |
| Dimensions [mm] | 1100 × 500 × 1460 |
Description:
SPARTUS® ProMIG 505 is high-end, modern inverter welding machine constructed on the basis
of advanced PWM technology and professional IGBT transistors. It enables MIG / TIG DC and MMA welding with a
current up to 500A. It is powered from three
phase 400V source power. The device offers a wide range of possibilities for the above-mentioned methods of
joining metals.
MIG welding
ProMIG 505 is equipped with a synergistic system for MIG / MAG welding with the possibility of
selecting the following programs: for mill steel, stainless steel, aluminum welding; self-shielding
wire welding and braze welding. It is possible to manually correct the parameters.
In addition, the device has a number of functionalities supporting the welding process in the
MIG method:
– 2T/4T Trigger Control
– Burn Back
– Slow Feed
– Pre Gas and Post Gas.
Separate high-class four-roller feeder ensures stable wire feeding. An important advantage is
also the possibility of welding with the Spool Gun.
TIG welding
Thanks to the solutions used, the ProMIG 505 also enables advanced welding with the TIG Lift
method.
ProMIG 505 has functions supporting the welding process in TIG method:
– 2T/4T Trigger Control,
– Down Slope.
MMA welding
The process of joining metals in this method is additionally supported by functions such as:
– Arc Force
– Hot Start.
Modern design, LCD function panel in combination with
high-class components makes the SPARTUS® ProMIG 505 stand out on the market.
The professional device of the SPARTUS® Pro line s perfect suited to the production sector and
industry.
SPARTUS® ProMIG 505 package:
device SPARTUS® ProMIG 505
separated wire feeder 4R
cooler
hypercoolant - cooling liquid 5l
driving set
MIG Gun SPARTUS® SPP 501 3m
2 x weire guide roller 0.8 - 1.0V fi30
5m connection cable set
3m electrode holder
3m mass cable with screw clamp
user's manual
