SPARTUS®
MasterMIG
250W DUAL PULSE
MULTOPROCESS, SYNERGIC MIG WITH DOUBLE PULSE
The possibility of a professional
welding TIG GUN
with microswitch
LIFT method.
The possibility of using a SPARTUS® Spool Gun
with a built-in wire feeder.
More...
Technical parameters
| Input | ~3× 400V ± 10% 50 / 60 Hz |
| Welding current MIG [A] | 15 – 250 |
| Duty cycle | 60[%] 250[A] 100[%] 195[A] |
| MIG PARAMETERS | |
| Output working voltage MIG [V] | 14.8 – 26.5 |
| Wire feeder | built-in, 4-roll gear |
| Wire feeding speed [m/min] | 1,5 – 24 |
| Wire diameter ∅ [mm] | 0.8 / 1.0 / 1.2 |
| Synergic MIG/MAG programs |  |
| 1P - with pulse | 17 programs |
| 2P - with dual pulse | 17 programs |
| SYNERGY - without pulse | 14 programs |
| Pulsation/dual pulsation | |
| Dual pulse regulation | |
| dPC (pulse current delta) | 10 – 200[A] |
| FdP (Frequency 2P) | 0,5 – 3,0[Hz] |
| dut (double pulsation width) | 10 – 90[%] |
| bAL (arc length of the current) | -10 – +10 |
| Spot welding | |
| Welding inductance adjustment | Wave Control |
| Operating mode | 2T/4T/s4T |
| Operating mode s4T | |
| SCP (initial current) | 10 – 200[%] |
| SAL (initial current arc length) | -10 – +10 |
| ECP (final current) | 10 – 200[%] |
| EAL (final current arc length) | -10 – +10 |
| Slow Feed | |
| Burn Back | |
| Pre-Gas/Post-Gas | |
| SPOOL GUN | |
| TIG PARAMETERS | |
| TIG welding current [A] | 10 – 250 |
| Arc ignition | Lift |
| Time of current descent [s] | 0 – 10 |
| MMA PARAMETERS | |
| Welding with MMA coated electrode | |
| MMA welding current [A] | 10 – 250 |
| Arc Force/Hot Start | |
| VRD | |
| OTHER | |
| Current consumption [A] | MIG 15,1/ MAG 18,2/ TIG 13,3 |
| Power factor (cosφ) | 0,70 |
| Efficiency η [%] | 85 |
| Insulation class | H |
| Protection class | IP23 |
| Water cooler | |
| Tank capacity [l] | 5 |
| Weight [kg] | 62,6 |
| Dimensions [mm] | 1100 × 580 × 700 |
Description:
SPARTUS® MasterMIG 250W Dual Pulse is a modern multi-functional inverter device for welding with MIG/MAG,
TIG and MMA methods. During its production, modern technologies were used, such as: IGBT transistors, PWM, MCU
control system. The device is powered from a 400V three-phase network and enables welding with a current of up
to 250A for all three methods.
MasterMIG 250W Dual Pulse have a number of modern functions necessary for high-performance and
high-quality MIG/MAG welding of materials such as steels, stainless steels, acid-resistant steels and aluminum
alloys. It will be used especially when welding aluminum and its alloys, thanks to the use of advanced
functions, dedicated to welding demanding alloys.
The most important functions:
•1P (Pulse) - MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc
•2P (Dual Pulse) - MIG/MAG welding with double pulsation
•Welding in two operating modes 2T/4T
•Spot welding
The use of double pulsation in the MIG/MAG method allows obtaining a weld of quality and aesthetics comparable
to the TIG method. The benefits of using double pulsation in the MIG/MAG method:
•High aesthetics (husk effect)
•Higher welding efficiency compared to the TIG method
•Smaller thermal deformations compared to the TIG method
•When welding aluminum requires less skill from the operator in relation to the TIG method
Simple to use and intuitive function panel allows precise control of parameters for MIG/MAG, TIG and MMA
methods. For the MIG/MAG methods it is possible to smoothly adjust the welding parameters such as: welding
voltage, wire feed speed, inductance. In addition, the device is equipped with synergic programs in which the
parameters are programmed - according to the welding mode and the material being welded.
MasterMIG 250W Dual Pulse is equipped with a professional four-roll wire feeder, which allows you to work
with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the
device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.
Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car
bodies (brazing), muffler welding, production sector, light industry, high-performance aluminum welding.
DeviceSPARTUS® MasterMIG 250W DUAL PULSE:
Device SPARTUS® MasterMIG 250W Dual Pulse
Cooler
Driving set
3m work clamp
Gas hose
User's manual
Package price [EUR]:
SPARTUS® MasterMIG 250W DUAL PULSE package:
Device SPARTUS® MasterMIG 250W Dual Pulse
Cooler
Driving set
MIG gun SPARTUS® SPM 241
3m electrode holder
3m work clamp
Gas hose
User's manual
Package price [EUR]:
NOVELTY! Choose the length of the MIG gun yourself!
The price of
the package includes the option of choosing a 3-, 4- or 5-meter MIG gun.
Lack of information results in random length selection.
