SPARTUS®
ProMIG 250 DUAL PULSE SYNERGY
MULTOPROCESS, SYNERGIC MIG WITH DOUBLE PULSE
The possibility of a professional
welding TIG GUN
with microswitch
LIFT method.
The possibility of using a SPARTUS® Spool Gun
with a built-in wire feeder.
More...
Technical parameters
| Input | ~3× 400V ± 10% 50 / 60 Hz |
| Welding current MIG [A] | 15 – 250 |
| Duty cycle | 60[%] 250[A] 100[%] 195[A] |
| MIG PARAMETERS | |
| Output working voltage MIG [V] | 14.8 – 26.5 |
| Wire feeder | built-in, 4-roll gear |
| Wire feeding speed [m/min] | 1,5 – 24 |
| Wire diameter ∅ [mm] | 0.8 / 1.0 / 1.2 |
| Synergic MIG/MAG programs |  |
| 1P - with pulse | 17 programs |
| 2P - with dual pulse | 17 programs |
| SYNERGY - without pulse | 14 programs |
| Pulsation/dual pulsation | |
| Dual pulse regulation | |
| dPC (pulse current delta) | 0 – 200[%] |
| FdP (Frequency 2P) | 0,5 – 3,0[Hz] |
| dut (double pulsation width) | 10 – 90[%] |
| bAL (arc length of the current) | -10 – +10 |
| Spot welding | |
| Welding inductance adjustment | Wave Control |
| Operating mode | 2T/4T/s4T |
| Operating mode s4T | |
| SCP (initial current) | 1 – 200[%] |
| SAL (initial current arc length) | -10 – +10 |
| ECP (final current) | 1 – 200[%] |
| EAL (final current arc length) | -10 – +10 |
| Slow Feed | |
| Burn Back | |
| Pre-Gas/Post-Gas | |
| SPOOL GUN | |
| TIG PARAMETERS | |
| TIG welding current [A] | 10 – 250 |
| Arc ignition | Lift |
| Time of current descent [s] | 0 – 10 |
| MMA PARAMETERS | |
| Welding with MMA coated electrode | |
| MMA welding current [A] | 15 – 250 |
| Arc Force/Hot Start | |
| VRD | |
| OTHER | |
| Current consumption [A] | MIG 15,1/ MAG 18,2/ TIG 13,3 |
| Power factor (cosφ) | 0,70 |
| Efficiency η [%] | 85 |
| Insulation class | H |
| Protection class | IP23 |
| Weight [kg] | 25,5 |
| Dimensions [mm] | 640 × 230 × 440 |
Description:
SPARTUS® ProMIG 250 Dual Pulse Synergy is a modern multi-functional inverter device for welding with MIG/MAG, TIG and MMA methods. During its production, modern technologies were used, such as: IGBT transistors, PWM, MCU control system. The device is powered from a 400V three-phase network and enables welding with a current of up to 250A for all three methods.
ProMIG 250 Dual Pulse Synergy have a number of modern functions necessary for high-performance and high-quality MIG/MAG welding of materials such as steels, stainless steels, acid-resistant steels and aluminum alloys. It will be used especially when welding aluminum and its alloys, thanks to the use of advanced functions, dedicated to welding demanding alloys.
The most important functions:
Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), silencer welding, production sector, light industry.
•1P (Pulse) - MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc
•2P (Dual Pulse) - MIG/MAG welding with double pulsation
•Welding in two operating modes 2T/4T
•Spot welding
The use of double pulsation in the MIG/MAG method allows obtaining a weld of quality and aesthetics comparable to the TIG method. The benefits of using double pulsation in the MIG/MAG method:
•High aesthetics (husk effect)
•Higher welding efficiency compared to the TIG method
•Smaller thermal deformations compared to the TIG method
•When welding aluminum requires less skill from the operator in relation to the TIG method
Simple to use and intuitive function panel allows precise control of parameters for MIG/MAG, TIG and MMA methods. For the MIG/MAG methods it is possible to smoothly adjust the welding parameters such as: welding voltage, wire feed speed, inductance. In addition, the device is equipped with synergic programs in which the parameters are programmed - according to the welding mode and the material being welded.
ProMIG 250 Dual Pulse Synergy is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the device is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.
Examples of applications: workshop work, renovation works in the field, automotive - welding of galvanized car bodies (brazing), muffler welding, production sector, light industry, high-performance aluminum welding.
Standard equipment:
Device ProMIG 250 Dual Pulse Synergy
3m mass hose
1.5m gas hose with bands
User’s manual (polish and english version)
Package equipment:
Device ProMIG 250 Dual Pulse Synergy
MIG GUN SPARTUS Pro 240 5m
3m electrode holder
3m mass hose
1.5m gas hose with bands
User’s manual (polish and english version)
