English version

MIG 160


1 / 5

Technical parameters

Input ~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A] 50 – 160
Duty cycle [%] 60
Output working voltage MIG [V] 17 – 22
Wire feeding speed [m/min] 2,5 – 13
Wire feeder built-in, 2-roll gear
Welding wire spool[kg]/[mm] ≤ 5 / ∅200
Wire diameter ∅ [mm] 0.6 / 0.8
2T/4T Control
MMA welding mode yes
Welding current MMA [A] 10 – 160
FCAW (Flux Cored Arc Welding) yes
Wire test yes
Current consumption [A] 20,6
Power factor (cosφ) 0,85
Efficiency η [%] 85
Insulation class F
Protection class IP23
Weight [kg]17,9
Dimensions [mm]500 × 250 × 410
Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge


SPARTUS Mater MIG 160. Compact, inverter MIG/MAG welder with additional stick welding function (MMA). It is powered from single phase 230V source power. Maximum welding current equal 160A with high of 60% duty cycle.

Intuitive and easy-to-use control panel allows rapid selection of the optimum welding parameters. It has ability to smooth adjustment: welding voltage, wire feed speed (MIG/MAG mode); welding current (MMA mode).

Quick connector of welding polarity and high end two-roll wire feeder - allow to easy flux-cored arc welding (FCAW).

Used in production of inverter technology guarantees excellent output parameters, stable welding arc and excellent weld quality.

Examples of use: workshop, portable repair, automotive, exhaust silencer welding.

Standard equipment:

3 meter work clamp

Gas hose with clamps

User’s manual

Package equipment:

3 meter electrode holder

3 meter work clamp

Gas hose with clamps

Gas regulator CO2

MIG gun SPARTUS Master 150 3m

User’s manual

Home page Contact Site map