English version

EasyMIG 185


1 / 6

Possibility to weld with a TIG torch
with a microswitch zdalne sterowanie

Technical parameters

Input ~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A] 40 – 180
Duty cycle MIG [%] 35
Output working voltage MIG [V]16 – 23
Wire feeding speed [m/min] 1.5 – 16.5
Wire feeder builid-in, 2 - roll gear
Welding wire spool [mm] ≤ 5[kg], Ø200
Wire diameter Ø [mm] 0.6 / 0.8 / 1.0
CuSi3 Brazing tak
Inductance control takWave Control
2T/4T switch tak
TIG DC welding tak
Welding current TIG [A] 10 – 180
Duty cycle TIG [%]35
Down Slope [s]0 - 10
2T/4T switch tak
Arc ignition Lift
Coated electrode MMA welding tak
Welding current MMA [A] 10 – 180
Duty cycle MMA [%] 35
Arc Force 0 - 10
Max. current consumpiton 230V [A] MIG 36.8 / MMA 42.9 / TIG 28.8
Power factor (cosφ) 0.6
Efficiency η [%] 85
Insulation classH
Protection classIP21
Weight [kg]15
Dimensions [mm]535 × 230 × 410
Download data sheet Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge


SPARTUS® EasyMIG 185 is a modern inverter, semi-automatic welding unit. It supports welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and tungsten inert gas (TIG Lift) welding with scratch ignition. The maximum welding current for all three techniques is 180A. The unit is powered from a single-phase 230V network.

The user-friendly control panel allows for instant adjustment of welding parameters depending on the selected technique:

MIG/MAG welding techniques - stepless adjustment of welding voltage, wire feed rate and inductance.
MMA welding technique - stepless adjustment of current intensity and Arc Force values (0 - 10)
TIG Lift - stepless adjustment of welding current intensity and down slope values (0 - 10)

Ultralight and portable EasyMIG welding unit. It is equipped with a two-roller welding wire feeder. In addition, thanks to a capability of polarity change, it supports gas-free self-shielding wire welding.

Exemplary applications: workshop, portable repair, automotive sector.

Package equipment:

EasyMIG 185 device

MIG gun SPARTUS® SPE 150 3m

Electrode holder

Work clamp

Gas hose with bands

User’s manual

Package price [EUR]:

Home page Contact Site map